NP231 Transfer Case for Jeep 1993-1994 Grand Cherokee
$769.30
Description
Application Notes: NV231; 23 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 27 Spline Slip Yoke Style Rear Output Shaft, 1.75 Inch Diameter Speedo hole, 4 Pin Shift Indicator Switch Above Shift Lever, 2 Piece Tail Housing, Tag Numbers: 52097534, 52097696, 52098318, Hollander Numbers: 412-281, Other Numbers: UMT207-9.
Remanufacturing Process
Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
- Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
- Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
- New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
- Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process
Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.
Additional Information
Additional information
| Weight | 74 lbs |
|---|---|
| Dimensions | 34 × 24 × 19 in |
| Model Number |
NP231 |
| Application Notes |
23 Spline Front Input 27 Spline Slip Rear Two Piece Tail Housing, 1.750 Speedo Hole Four Wire Shift. ASSM# 52097534, 52097696, 52098318. 23 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 27 Spline Slip Yoke Style Rear Output Shaft, 1.75 Inch Diameter Speedo hole, 4 Pin Shift Indicator Switch Above Shift Lever, 2 Piece Tail Housing, Tag Numbers: 52097534, 52097696, 52098318, Hollander Numbers: 412-281, Other Numbers: UMT207-9 |
| Product Type |
Transfer Cases |
