NP231 Transfer Case for Jeep 1997-2002 Wrangler

$839.30

  • All units are quality inspected throughout the remanufacturing process to maintain our quality standard.
  • All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
  • 100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
  • Units are shipped in high density plastic totes to help eliminate in-transit damage.
  • SKU: AE_421_LLC_1404 Category:

    Description

    Application Notes: NV231; 21 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 27 Exposed Spline Style Rear Output Shaft With Rubber Boot, 2 Pin Shift Indicator Switch Above Shift Lever, Hollander Numbers: 412-348, Tag Numbers: 52098471, 52099310, 52099310AB, 52099364, 52099364AB, 52099364AE.

    Remanufacturing Process

    Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:

    • Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
    • Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
    • New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
    • Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process

    Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.

    Additional Information

    Additional information

    Weight 74 lbs
    Dimensions 34 × 24 × 18 in
    Model Number

    NP231

    Application Notes

    21 Spline Front Input 27 Spline Slip Rear W/Rubber Boot, W/Speedo Hole, Fixed Front Output Yoke Two. ASSM# 52098471, 52099310, 52099310ab,52099364, 52099364ab. 21 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 27 Exposed Spline Style Rear Output Shaft With Rubber Boot, 2 Pin Shift Indicator Switch Above Shift Lever, Hollander Numbers: 412-348, Tag Numbers: 52098471, 52099310, 52099310AB, 52099364, 52099364AB, 52099364AE

    Product Type

    Transfer Cases