S6-S650F Manual Trans for Ford 2002-2004 F-series 5.4L & 6.8L, 6 Speed

$2,624.30

  • Quality inspections are conducted 3 times during the remanufacturing process
  • A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
  • A second inspection is conducted during the reman process to ensure all component parts meet OEM specifications
  • A final post-build inspection is done to ensure unit is built to our strict standards
  • 100% inspection of internal parts, including gear wear checks, mainshaft straightness test and synchronizer testing.
  • All transmissions are dynometer tested and ran through numerous real life scenarios.
  • SKU: AE_743_LLC_059 Category:

    Description

    Application Notes:S6-650; ZF Built, Front And Rear Cases, Integral Bell Housing, 5:79 Low-0:72 Gear Ratio, 24 Spline Output Shaft, ID: 1319-050-044, 2C34-BB, 2C34-HA, 2C34-HC, 2C3Z-HCRM, Hollander Number: 400-00661S6-650; ZF Built, Front And Rear Cases, Integral Bell Housing, 5:79 Low-0:72 Gear Ratio, 24 Spline Output Shaft, ID: 1319-050-044, 2C34-BB, 2C34-HA, 2C34-HC, 2C3Z-HCRM, Hollander Number: 400-00661.

    Remanufacturing Process

    Every remanufactured transmission we sell is backed by a Million Mile warranty up to 7 years, the best in the industry. The reason we can offer this warranty? Every transmission undergoes the same rigorous remanufacturing process:

    1. Teardown and Triple Clean – Every transmission is disassembled, inspected, and cleaned three times. We also chase all threads and install all new bushings during this process.
    2. New or Re-machined Parts – Gear wear is checked and worn gears are replaced. Mainshaft straightness is tested and replaced if needed. Clutch disc synchronizers, selector fork, and flywheel are re-machined or replaced as needed.
    3. Dyno Testing – Our custom dyno testing machines spin and load test every transmission to verify it’s ready for the road.

    When you buy a remanufactured transmission from Powertrain Products, you’re buying a transmission that meets or exceeds OEM specifications. And we back that claim up with our available 7 Year, 1 Million Mile Warranty.

    Additional Information

    Additional information

    Weight 230 lbs
    Dimensions 42 × 27 × 26 in
    Product Type

    Transmissions

    Application Notes

    S6-650; ZF Built, Front And Rear Cases, Integral Bell Housing, 5:79 Low-0:72 Gear Ratio, 24 Spline Output Shaft, ID: 1319-050-044, 2C34-BB, 2C34-HA, 2C34-HC, 2C3Z-HCRM, Hollander Number: 400-00661

    Model Number

    S6-S650F